What is a magnetic material

1. Magnetic materials:

There are many classification methods for magnetic materials, which can be divided into industrial grade and civilian grade according to their use; According to performance, it can be divided into soft magnetic materials and hard magnetic materials; According to different application ranges, it can be divided into permanent magnetic field materials and Gaussian distributed electromagnets (such as motor rotors).

Black Block Jpg

2. Production process:
1. Selection and treatment of raw materials - Mix various raw materials in a certain proportion and crush them into powder;
2. Ball milling of powder - treating impurities in the powder through a ball mill and distributing them evenly in all corners;
3. Add an appropriate amount of adhesive (such as epoxy resin or phenolic resin) to the powder after ball milling;
4. Add the mixed material into the mold for compression molding (injection molding) - to make the particles in the material come into contact with each other and form a certain shape;
5. Treat the surface of the pressed workpiece and polish it with sandpaper - remove burrs and scratches on the surface of the workpiece and make it smoother and smoother
6. Apply a layer of paint to the surface of the workpiece using spray painting to increase its wear resistance.

Mg 8618 Jpg

3. Product Introduction.

1. Used for manufacturing coil frames of various motor stator windings and other parts with high strength requirements.
2. Used for making iron cores for transformers, transformers, and other special motors.
3. Used as an iron core for high-precision instruments and meters.
4. Used as a spindle for electronic computer hard drive..
5. Used as a crankshaft bearing for automotive engines.
6. Used for manufacturing precision mechanical components.
7. Can be used for medical equipment.
8. Can be used in the military field.

9. It can be applied in fields such as aerospace.

Mg 8678 Jpg

4. Main technical indicators.
1. Resistivity: 10 ^ -6~10 ^ -9scm.
2. Coercivity: 1kgmm2.
3. Residual magnetism: around 0-10mg.
4. Temperature characteristics: Resistivity at 20 ° C is 1 × one thousand and sixteen ω· M.
5. Working voltage: 5v ± 5%.
5. Scope of application.
1. Widely used in the production of stator coil frames and parts with high strength requirements for various types of generators, motors, and other rotating motors and electrical equipment
2. Suitable for the production of rotors and stators of special motors such as transformers and transformers, as well as electromagnets.